Structures for signage and panels
Stable supports for billboards, construction-site signage or development signs.
Suitable for
Concrete scenarios where this solution works well.
Roadside billboard
A load-bearing structure anchored in the ground, sized for local wind loads. Maximum visibility, guaranteed stability.
Signage for a real-estate or development project
Clear signs at the road or entrance, installed quickly without blocking the site. Temporary or permanent.
Construction-site signs
Temporary regulation and information: site boards, warning panels, entrance identification.
Information or directional totem
At the entrance to a complex, industrial park or shopping centre: a stable, aesthetic structure, installed precisely.
What’s included
What you get when you work with Martetic on this solution category.
- Site assessment and indicative wind-load calculation
- Installation of screw or concrete foundations (depending on the panel)
- Installation of the support structure (single post, double post or frame)
- Alignment and verticality check
- Fixing the panel to the structure (if specified)
- Transport and clean-up at handover
How it works
The main steps from order to handover, for this category.
Assessment and panel specifications
Dimensions, weight, panel type. We calculate the wind load and choose the foundation type.
Foundation installation
Screwed in for temporary or relocatable solutions. Concreted for permanent, high-load applications.
Support structure installation
Post, frame or double system, welded or jointed, depending on the project.
Panel installation and handover
Panel fixing and alignment. Final check, clean-up, handover.
Advantages
What makes this solution better than the classic alternatives.
Fast
Installation in a few hours for standard panels. Your signage is operational the same day.
Relocatable if needed
Screw foundations for temporary or construction-site projects, removed without a trace.
Sized for wind loads
The structure does not give way in wind. We calculate according to the area and the panel dimensions.
No major digging
Screw foundations where the soil allows, without excavation, without concrete, without mess.
Products that may be considered
The options below are a starting point. The final selection is confirmed after the structure, ground, loads, connection and installation conditions.
G, M or Custom, depending on the wind-exposed area
What you need to send us
The location, dimensions, the sketch or plan, known weight or loads, photographs of the ground and the desired deadline.
What we check
The ground, access, bearing points, the connection to the structure, vertical and lateral loads and the possibility of installation.
Frequently asked questions
What customers usually ask about this category.
From small signs (1×0.5 m) to panels of 4×3 m or larger. The structure is sized to the weight and area of your panel.
Yes. We calculate the wind load specific to the site area and size the foundation and structure accordingly.
Both. Screw foundations for temporary, removed without a trace. Concrete foundations for permanent, stiffer, without relocation.
Yes. We build the support structure. You or your printer supply the panel. We discuss fixing the panel to the structure at the design stage.
Transport, foundation installation, support structure installation, alignment and verification. The actual fixing of the panel to the structure depends on specifications and weight.
Describe your project
Tell us what you want to install and where. You receive a clear proposal with options.
No obligations. No hidden costs.
Request a proposal